SEALS YOUR LEAKS WHEN YOU NEED PROTECTION MOST!
For renewing sloped and dead level paper, gravel and metal roofs. For commercial, industrial and institutional use, solve the most difficult problems with WET-JETŪ.
WHAT GOES INTO
PRODUCING A SUPERIOR ROOF COATING?
This new technology blended with the finest asphalts gives WET-JETŪ its toughness...the toughness to withstand sub-freezing temperatures and still retain amazing flexibility. It expands and contracts with the roof mat even through sudden temperature drops.
The fiberglass gives WET-JET the extra strength to bridge cracks and splits...In hot weather it makes sure WET-JET won't sag or run on a metal roof - even at 400° F. Coated on smooth metal and inclined at an angle of 60°, it won't run or sag.
Our ADDITIVES -- X-5 Oil -- gives WET-JET the super penetration it needs to restore life to old sloped gravel and paper built-up roofs. Pinecel thrusts back the deadly oxidizing rays of the sun that break a roof down fast, forcing expensive, premature replacement.
These sophisticated blends give WET-JET super penetration...make it easy to apply. With brush, roller or SEAMLESS SPRAY Equipment, WET-JET goes down fast...the complete renewal takes just one coat...makes renewing roofs a simple job, not a complicated expensive nightmare.
PACE's Total Roof Renewal System applying a WET-JET roof coating uses the existing roof as a base and will restore, seal, recondition and waterproof old worn out roofs, saving unnecessary tear off and replacement expense - all in one easy, one coat process. With PACE's WET-JET Roof Renewal System, over 90% of a building owner's money goes toward the materials which keep the roof watertight. Expensive contractor labor and overhead costs are bypassed. Thousands of dollars are saved on even the smaller roofs!
WET-JET has an unprecedented ability to expand and contract, and withstand tremendous temperature changes. Because WET-JET will give and take with the movement of the roof, it will not peel, crack or become brittle even under sub-freezing temperatures...unsurpassed for complete overall roof renewal and savings.
With WET-JET, the original Wet Surface Coating, emergency repairs can start immediately. WET-JET sticks to the wet roof, stops the leak and keeps it stopped. There's no need to wait for the sun to shine. WET-JET keeps production going and the business running; there's no lost production of business due to a damaging roof leak. Then when the storm abates, the complete roof renewal can be accomplished.
Covers at rate of 1 1/2 gallons per 100 sq. ft. on smooth metal; 2 gallons per 100 sq. ft. on corrugated metal; 3 gallons per 100 sq. ft. on sloped paper, mineral/composition; 6-8 gallons per 100 sq. ft. on sloped and dead level gravel. Available in 55 gal. and 205 litre barrels and 5 gal. and 20 litre pails.